POKA YOKE TO PREVENT HUMAN ERROR AT MOULDING PROCESS OF INTEGRATED CIRCUIT ASSEMBLY

Arif Rahman Hakim, James Hellyward

Abstract


This article describes a study conducted on the method to prevent error in manufacturing. Two cases in Integrated Circuit manufacturing was observed regarding human error occurred in moulding process. A technical solution was applied to prevent the case to occur. Mechanical approach solution named poka yoke was applied to the location of problem. It is proven that the solution is effective in preventing similar error to occur.

Keywords


manufacture, error, zero defect, poka yoke.

Full Text:

PDF

References


Bowen Zheng and Grace X. Gu, 2019, Tuning graphene mechanical anisotropy via defect engineering, Elsevier. Available on : https://www.sciencedirect.com/science/article/pii/S0008622319309078

Florian Eger, Daniel Coupek, Davide Caputo, Marcello Colledani, Mariluz Penalva, Jon Ander Ortiz, Hermann Freiberger, Gernot Kollegger, 2018, Zero defect manufacturing strategies for reduction of scrap and inspection effort in multi-stage production systems, Elsevier. Available online at : www.sciencedirect.com

Foivos Psarommatis, Gokan May, Paul Dreyfus & Dimitris Kiritsis, Apr 2019, Zero defect manufacturing: state-of-the-art review, shortcomings and future directions in research, International Journal of Production Research. Available on : https://doi.org/10.1080/00207543.2019.1605228

Imai, Masaaki, Kaizen, The Key to Japan’s Competitive Success, The Kaizen Institute, Ltd. 1996

KV Gopinath and K Padmanabhan, 2020, Design and value engineering of a high temperature high pressure multifunctional compression moulding unit to manufacture zero defect part, IOP Conference Series : Material Science and Engineering 1123 (2021) 012046 doi:10.1088/1757-899X/1123/I/012046.

Kathryn A. Ingle, Reverse Engineering, McGraw-Hill, Inc, 1994

O. Myklebust, 2013, Zero defect manufacturing: a product and plant oriented lifecycle approach, 8th CIRP Conference on Intelligent Computation in Manufacturing Engineering, Available online at : www.sciencedirect.com

Pitta, Dennis A, University of Baltimore, Baltimore Maryland USA, Product Innovation and Management in a Small Enterprice, Journal of product and brand management, Emerald Group Publishing, 2008.

Shingo, Shigeo, Zero Quality Control: Source Inspection and the Poka Yoke System, Productivity Press, 1986




DOI: https://doi.org/10.33373/sigmateknika.v4i1.3226

Refbacks

  • There are currently no refbacks.





E-ISSN 2599-0616

 

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

 

Sigma Teknika

Gedung Lt.1 Kampus Universitas Riau Kepulauan Batam

Jl. Batu Aji Baru No.99 Batu Aji

Email: sigmateknika@journal.unrika.ac.id

 

 

Web Analytics