ANALISIS BIBLIOMETRIK (2014-2023): TREN LEAN MANUFACTURING DI SCIENCEDIRECT DENGAN VOSVIEWER

Qomarotun Nurlaila, Nilda Tri Putri, Elita Amrina

Abstract


Research on the topic of lean Manufacturing (LM) has a good trend at the international level. Bibliometric analysis with VOSviewer has been widely applied by researchers to see research trends in a topic, quantitatively assess the current status and quickly identify future research directions based on unique publication parameters. Bibliometric analysis was conducted on 548 articles from ScienceDirect for the topic of LM in the period 2014 to 4 June 2023. From 29 journals it detected the names of journals that frequently published and names of journals that provided opportunities for authors to submit articles. Detected 1449 authors, 591 were the main authors and 858 were co-authors. The majority of the top-30 productive researchers are co-authors. Detected 53 names of countries of the main author, 8 countries that occupy the top-10 are developed countries and only 2 countries are developing countries. In writing articles, the author has a majority team of 2-4 people in one team. Based on the results of the VOSviewer mapping, there is a novelty in research for the keywords additive manufacturing and OEE. Recommendations for further research are that LM research carries manufacturing, focusing on engine performance using OEE indicators and the industry 4.0 approach.

Keywords


Lean Manufacturing (LM), Bibliometric Analysis, VOSviewer, Trend, ScienceDirect

Full Text:

PDF

References


S. I. Abdelwahab, M. M. E. Taha, S. S. Moni, and A. A. Alsayegh, “Bibliometric mapping of solid lipid nanoparticles research (2012–2022) using VOSviewer,” Med. Nov. Technol. Devices, vol. 17, no. February, p. 100217, 2023, doi: 10.1016/j.medntd.2023.100217.

Y. Shi et al., “COVID-19 pharmacological research trends: a bibliometric analysis,” Intell. Med., vol. 3, no. 1, pp. 1–9, 2023, doi: 10.1016/j.imed.2022.06.004.

D. Kurniawati and A. Cakravastia, “A review of halal supply chain research: Sustainability and operations research perspective,” Clean. Logist. Supply Chain, vol. 6, no. July 2022, p. 100096, 2023, doi: 10.1016/j.clscn.2023.100096.

E. Lodgaard and D. Powell, “The changing role of shop-floor operators in zero defect manufacturing,” Procedia CIRP, vol. 104, pp. 594–599, 2021, doi: https://doi.org/10.1016/j.procir.2021.11.100.

M. AlManei, K. Salonitis, and Y. Xu, “Lean implementation frameworks: the challenges for SMEs,” Procedia Cirp, 2017, [Online]. Available: https://www.sciencedirect.com/science/article/pii/S2212827117303529

F. Gleeson, P. Coughlan, L. Goodman, A. Newell, and V. Hargaden, “Improving manufacturing productivity by combining cognitive engineering and lean-six sigma methods.,” Procedia CIRP, vol. 81, pp. 641–646, 2019, doi: https://doi.org/10.1016/j.procir.2019.03.169.

J. Dolšak, “Determinants of energy efficient retrofits in residential sector: A comprehensive analysis,” Energy Build., vol. 282, no. 2023, 2023, doi: 10.1016/j.enbuild.2023.112801.

M. K. Paliwal, S. Jakhar, and V. Sharma, “Nano-enhanced phase change materials for energy storage in photovoltaic thermal management systems: A bibliometric and thematic analysis,” Int. J. Thermofluids, vol. 17, no. February, p. 100310, 2023, doi: 10.1016/j.ijft.2023.100310.

L. Liu, W. Song, and Y. Liu, “Leveraging digital capabilities toward a circular economy: Reinforcing sustainable supply chain management with Industry 4.0 technologies,” Comput. Ind. Eng., vol. 178, no. February, p. 109113, 2023, doi: 10.1016/j.cie.2023.109113.

A. Samadhiya, R. Agrawal, A. Kumar, and J. A. Garza-Reyes, “Regenerating the logistics industry through the Physical Internet Paradigm: A systematic literature review and future research orchestration,” Comput. Ind. Eng., vol. 178, no. March, p. 109150, 2023, doi: 10.1016/j.cie.2023.109150.

M. Yang, M. K. Lim, Y. Qu, D. Ni, and Z. Xiao, “Supply chain risk management with machine learning technology: A literature review and future research directions,” Comput. Ind. Eng., vol. 175, no. December 2022, 2023, doi: 10.1016/j.cie.2022.108859.

Y. Li, Q. Du, J. Zhang, Y. Jiang, J. Zhou, and Z. Ye, “Visualizing the intellectual landscape and evolution of transportation system resilience: A bibliometric analysis in CiteSpace,” Dev. Built Environ., vol. 14, no. August 2022, 2023, doi: 10.1016/j.dibe.2023.100149.

J. A. Gordon, N. Balta-Ozkan, and S. A. Nabavi, “Socio-technical barriers to domestic hydrogen futures: Repurposing pipelines, policies, and public perceptions,” Appl. Energy, vol. 336, no. February, p. 120850, 2023, doi: 10.1016/j.apenergy.2023.120850.

M. A. Budihardjo, N. G. Humaira, B. S. Ramadan, I. F. S. Wahyuningrum, and H. S. Huboyo, “Strategies to reduce greenhouse gas emissions from municipal solid waste management in Indonesia: The case of Semarang City,” Alexandria Eng. J., vol. 69, pp. 771–783, 2023, doi: 10.1016/j.aej.2023.02.029.




DOI: https://doi.org/10.33373/sigmateknika.v6i2.5349

Refbacks

  • There are currently no refbacks.





E-ISSN 2599-0616

 

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

 

Sigma Teknika

Gedung Lt.1 Kampus Universitas Riau Kepulauan Batam

Jl. Batu Aji Baru No.99 Batu Aji

Email: sigmateknika@journal.unrika.ac.id

 

 

Web Analytics