PERENCANAAN KEBUTUHAN DISTRIBUSI MENGGUNAKAN PENDEKATAN DISTRIBUTION RESOURCES PLANNING PADA PERUSAHAAN BAJA COR

Dimas Akmarul Putera, Rosie Oktavia Puspita Rini, Ansarullah Lawi, Tirta Mulyadi, Wahyudi Ilham, Aulia Agung Dermawan

Abstract


PT. XYZ merupakan sebuah perusahaan manufaktur yang berfokus pada produksi komponen mesin dari baja cor untuk berbagai keperluan industri, termasuk pertambangan, kelapa sawit, peralatan berat, dan industri karet. Salah satu produk yang menjadi fokus penelitian adalah jaw plate, yang menjadi produk dengan permintaan tertinggi di pasaran dibandingkan dengan produk lainnya. Penelitian ini bertujuan untuk mengatasi ketidaksesuaian antara jumlah produk yang dipasok dengan permintaan di Distribution Centre (DC) Aceh dan DC Jambi, yang berakibat pada kekurangan stok produk di DC tersebut. Pendekatan yang digunakan adalah perencanaan kebutuhan distribusi menggunakan metode Distribution Resources Planning (DRP) dan Model Economic Order Quantity (EOQ) untuk menentukan ukuran pemesanan yang ekonomis. Hasil penelitian menunjukkan bahwa untuk DC Aceh dan DC Jambi, ukuran pesanan yang ekonomis (q) adalah 136 unit dan 109 unit, dengan stok keselamatan (ss) sebanyak 4 unit dan 8 unit, serta titik pemesanan ulang (reorder point, r) sebanyak 24 unit dan 17 unit.

Keywords


Baja Cor, Distribution Resource Planning, Peramalan, Rantai Pasok, Reorder Point, Safety Stock,

Full Text:

PDF

References


D. A. Putera, “Pengendalian Persediaan Beras Menggunakan Pendekatan Sistem Dinamis Di Perum Bulog Divre Sumut,” Universitas Sumatera Utara, Medan, 2021. [Online]. Available: https://repositori.usu.ac.id/handle/123456789/47744

D. A. Putera, A. A. Dermawan, D. E. Kurniawan, A. W. Aranski, and R. Dio, “Design of an Arduino Mega-Based Walking Cane Assistive Device to Improve the Quality of Life for the Elderly in the Riau Islands Province,” Sci. J. Informatics, vol. 10, no. 4, pp. 499–512, 2023, doi: 10.15294/sji.v10i4.47793.

F. R. Jacobs and R. B. Chase, Operations and supply chain management. McGraw-Hill, 2018.

S. Noroozi and J. Wikner, “Sales and operations planning in the process industry: A literature review,” Int. J. Prod. Econ., vol. 188, pp. 139–155, 2017, doi: https://doi.org/10.1016/j.ijpe.2017.03.006.

I. Suemitsu, N. Miyashita, J. Hosoda, Y. Shimazu, T. Nishikawa, and K. Izui, “Integration of sales, inventory, and transportation resource planning by dynamic-demand joint replenishment problem with time-varying costs,” Comput. Ind. Eng., vol. 188, p. 109922, 2024, doi: https://doi.org/10.1016/j.cie.2024.109922.

A. Alnaggar, F. Gzara, and J. H. Bookbinder, “Distribution planning with random demand and recourse in a transshipment network,” EURO J. Transp. Logist., vol. 9, no. 1, p. 100007, 2020, doi: https://doi.org/10.1016/j.ejtl.2020.100007.

G. Guastaroba, M. G. Speranza, and D. Vigo, “Intermediate Facilities in Freight Transportation Planning: A Survey,” Transp. Sci., vol. 50, no. 3, pp. 763–789, Jan. 2016, doi: 10.1287/trsc.2015.0631.

K. Watson and T. Polito, “Comparison of DRP and TOC financial performance within a multi-product, multi-echelon physical distribution environment,” Int. J. Prod. Res., vol. 41, no. 4, pp. 741–765, Jan. 2003, doi: 10.1080/0020754031000065511.

D. Milewski and T. Wiśniewski, “Regression analysis as an alternative method of determining the Economic Order Quantity and Reorder Point,” Heliyon, vol. 8, no. 9, p. e10643, 2022, doi: https://doi.org/10.1016/j.heliyon.2022.e10643.

M. K. Salameh, A. A. Yassine, B. Maddah, and L. Ghaddar, “Joint replenishment model with substitution,” Appl. Math. Model., vol. 38, no. 14, pp. 3662–3671, 2014, doi: https://doi.org/10.1016/j.apm.2013.12.008.

D. Milewski, “Simulation as a way of optimizing a delivery size: Impact on the profitability of an enterprise,” Zesz. Nauk. Akad. Morskiej w Szczecinie, 2019.

P. Yılmaz and B. Çatay, “Strategic level three-stage production distribution planning with capacity expansion,” Comput. Ind. Eng., vol. 51, no. 4, pp. 609–620, 2006, doi: https://doi.org/10.1016/j.cie.2006.05.004.

W. Wang, R. Y. K. Fung, and Y. Chai, “Approach of just-in-time distribution requirements planning for supply chain management,” Int. J. Prod. Econ., vol. 91, no. 2, pp. 101–107, 2004, doi: https://doi.org/10.1016/S0925-5273(03)00212-3.

N. Tuomikangas and R. Kaipia, “A coordination framework for sales and operations planning (S&OP): Synthesis from the literature,” Int. J. Prod. Econ., vol. 154, pp. 243–262, 2014, doi: https://doi.org/10.1016/j.ijpe.2014.04.026.

M. Bieshaar, S. Zernetsch, K. Riepe, K. Doll, and B. Sick, “Cyclist Motion State Forecasting - Going beyond Detection,” in 2021 IEEE Symposium Series on Computational Intelligence (SSCI), 2021, pp. 1–8. doi: 10.1109/SSCI50451.2021.9660151.

L. E. Cárdenas-Barrón, A. A. Shaikh, S. Tiwari, and G. Treviño-Garza, “An EOQ inventory model with nonlinear stock dependent holding cost, nonlinear stock dependent demand and trade credit,” Comput. Ind. Eng., vol. 139, p. 105557, 2020, doi: https://doi.org/10.1016/j.cie.2018.12.004.

Z. Guo and H. Wang, “Implications on managing inventory systems for products with stock-dependent demand and nonlinear holding cost via the adaptive EOQ policy,” Comput. Oper. Res., vol. 150, p. 106080, 2023, doi: https://doi.org/10.1016/j.cor.2022.106080.

S. Eberlein and M. Freitag, “Pull control of material supply for low-volume assembly lines: a reorder point method for aerospace manufacturing,” Procedia CIRP, vol. 120, pp. 1612–1617, 2023, doi: https://doi.org/10.1016/j.procir.2023.12.004.

D. A. Putera, A. R. Matondang, and M. T. Sembiring, “Rice distribution planning using distribution resources planning (DRP) method,” AIP Conf. Proc., vol. 2471, no. 1, pp. 060002-1-060002–6, 2023, doi: https://doi.org/10.1063/5.0129254.

D. A. Putera, A. R. Matondang, M. T. Sembiring, and A. A. Dermawan, “PENERAPAN SEVEN TOOLS UNTUK MENGIDENTIFIKASI KADAR LIMBAH CAIR (POME) DI PERUSAHAAN KELAPA SAWIT,” Sigma Tek., vol. 5, no. 1, pp. 22–29, 2022, doi: https://doi.org/10.33373/sigmateknika.v5i1.4165.




DOI: https://doi.org/10.33373/sigmateknika.v7i1.6190

Refbacks

  • There are currently no refbacks.





E-ISSN 2599-0616

 

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

 

Sigma Teknika

Gedung Lt.1 Kampus Universitas Riau Kepulauan Batam

Jl. Batu Aji Baru No.99 Batu Aji

Email: sigmateknika@journal.unrika.ac.id

 

 

Web Analytics