PERBAIKAN TATA LETAK FASILITAS DENGAN METODE SYSTEMATIC LAYOUT PLANNING (SLP) UNTUK MENGURANGI JARAK PERPINDAHAN MATERIAL (STUDI KASUS UKM KERUPUK KAROMAH)

Bayu Saputra, Zaenal ARifin, ST, MT, Abdullah Merjani

Abstract


This study aims to improve the layout of facilities to reduce the distance of material transfer in Karomah Crackers SMEs by using the Systematic Layout Planning (SLP) method in which the procedure consists of three stages, the analysis phase covering the material flow analysis Activity Relationship Chart (ARC) analysis, Activity Analysis Relationship Diagram (ARD), analysis of the needs of the area and available area. The adjustment phase includes the planning of room relationship diagrams and alternative layout plans. The evaluation stage was carried out by selecting alternative layout designs. Based on the Systematic Layout Planning (SLP) method, 3 proposal layouts were produced, all of which had minimized the distance. Layout I can save a distance of 11%. Proposed Layout II saves a distance of 35% and the proposed layout III can save a distance of 30%. So that the layout of proposal I is recommended as a chosen proposal layout.


Keywords


Facility Layout, Systematic Layout Planning, Activity Relationship Chart (ARC), Activity Relationship Diagram

Full Text:

PDF

References


Apple, James M., Plant Layout And Material Handling, Third Edition, Jhon Willey and sons, Inc., 1977

Hadiguna , R.A dan Setiawan , H.2008 . Tata Letah Pabrik. Andi. Yogyakarta

Iftikar z, Sutalaksana .2006.Teknik Perencanaan Sistem Kerja. Bandung.ITB

Jurnal Ilmiah Teknik Industri Vol 4 No .3, 2006

Moore, J.M, Plant Layout and Design, New York: Macmillan Company,1962

Murther, Richard, Practical Plant Layout, First Edition , Mc Graw-Hill Book Company, Inc, New York,1995

Purnomo,H., 2004. Perencanaan dan Perancangan Tata Letak Fasilitas. Cetakan Pertama. Graha Ilmu. Yogyakarta.

Wignjosoebroto, S., 2009. Tata Letak Pebrik dan Pemindahan Bahan. Edisi Ketiga . Guna Widya. Surabaya




DOI: https://doi.org/10.33373/profis.v8i1.2557

Refbacks

  • There are currently no refbacks.


Copyright (c) 2020 PROFISIENSI

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

E-ISSN 2598-9987

 

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.


PROFISIENSI: Jurnal Program Studi Teknik Industri

Building A, 1st Floor, Faculty of Engineering, University of Riau Kepulauan

Jl. Pahlawan No.99, Batu Aji, Batam, Kepulauan Riau

Email: Profisiensi@journal.unrika.ac.id

 

Web Analytics Made Easy - Statcounter