PERANCANGAN SISTEM KANBAN BARCODE PADA AREA WAREHOUSE (STUDI KASUS : PT.SPIB)

Rini Octaviani Santosa Universitas Riau Kepulauan, Batam
Vera Methalina Afma Universitas Riau Kepulauan, Batam
Abdullah Merjani Universitas Riau Kepulauan, Batam

DOI: https://doi.org/10.33373/profis.v10i1.4327

Abstract

PT. SPIB is one of plastic manufacturer components in Batam. In the process of recording transactions of goods entering the warehouse or called GTN (Goods Transfer Notes) manually, there is the potential for recording errors to occur, causing data discrepancies between report data and actual goods. Based on data in June 2021 with a GTN frequency of 1,734 times, there Stock Errors were 108 times. The design of the Kanban System Barcode in this study aims to reduce the problems that occur in the transaction process of goods entering the warehouse. The results of using the kanban system barcode method, show a decrease in Stock Error to 14 times with GTN data in July 2021 as many as 1,161 times. And percentage data Stock Error in June amounted to 89% down to 11% in July. In addition, there is a decrease in working time on the process flow map from 43 minutes to 23 minutes and can reduce repetitive work processes in the GTN process.

References

Arnold, J. (2004). Introduction to Material Management. New Jersey: Prentice Hall.
Industries, P. S. (2021, February 27). PT Suntech Plastics Industries Batam. Diambil kembali dari www.suntechplas.com
M. Derajat A, & Syajarudin Ma’ruf. (2006). Usulan Penerapan Sistem F/G Kanban Barcode Untuk Menurunkan Overstock “Studi Kasus Pada Pt. Irc Inoac Indonesia Tangerang”. Jurnal Inovisi™, 10-24.
Matondang, T. P., & Ulkhaq, M. M. (2018). Aplikasi Seven Tools untuk Mengurangi Cacat Produk White Body pada Mesin Roller. Jurnal Sistem dan Manajemen Industri, 59-66.
Monden, Y. (2000). Toyota Production System. Jakarta: Penerbit PPM.
Panuntun, A. B. (2008). Perancangan Sistem Kanban Barcode Pemasok Pada Lini Produksi Di Perusahaan Komponen Mobil.
Pranoto. (2008). Penerapan Sistem Kanban Di Bagian Produksi Eksport PT.STEP. 13-14.
Schroeder, R. G. (1995). Operation Management: Decision Making in the operation function 3rd edition. Penerbit Erlangga.
Takeda, H. (1999). The Synchronic Production System: Just In Time for The Entire Company. Nikkan Kogyo Shimbun Ltd: Greta Konradt.
White, J. A. (1987). Production Hanbook. Atlanta: Georgia Institute of Tehcnology.
Wignjosoebroto, S. (2006). Pengantar Teknik dan Manajemen Industri (Vol. 1). Surabaya: Penerbit Guna Widya.
Yasuhiro, M. (1998). Toyota production System: An Integrated Approach to Just in Time (3rd ed). Georgia : Engineering & Management Press.

Published

2022-07-30

How to Cite

OCTAVIANI SANTOSA, Rini; AFMA, Vera Methalina; MERJANI, Abdullah. PERANCANGAN SISTEM KANBAN BARCODE PADA AREA WAREHOUSE (STUDI KASUS : PT.SPIB). PROFISIENSI: Jurnal Program Studi Teknik Industri, [S.l.], v. 10, n. 1, p. 55-64, july 2022. ISSN 2598-9987. Available at: <https://journal.unrika.ac.id/index.php/jurnalprofisiensi/article/view/4327>. Date accessed: 15 feb. 2026. doi: https://doi.org/10.33373/profis.v10i1.4327.

Citation Formats

Issue

Vol 10 No 1 (2022): PROFISIENSI JULI 2022

Section

Articles

Keywords

GTN, Stock Error, Kanban Barcode

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

PROFISIENSI uses an exclusive license agreement. The authors will retain copyright along with the rights for academic use, while Universitas Riau Kepulauan will be granted publishing and distribution rights.

Open-access authors retain the copyright of their papers, and all open-access articles are distributed under the terms of the Creative Commons Attribution License (CC-BY), allowing others to distribute and copy the articles as long as the original work is properly cited.

Users cannot represent authors as support for the adaptation of their articles and do not change articles in such a way as to damage the honor or reputation of the author.